Description

• Temperature data logging sensor with K type thermocouple probe and integrated display
• Supports J,K,N,T type thermocouple probes
• Easy sensor set-up using the free PC software application (Downloadable from www.corintech.com)
• Wirelessly stream data to PC or Cloud* via WiFi
• View and analyse multiple sensors, including immediate graphing of historic data
• Selectable measurement scale °C / °F
• Temperature accuracy ±1.5°C (probe dependant)
• Temperature measurement resolution to 0. 1°C
• Temperature display resolution to 0. 1°C (-99.9 to +999.9°C)
• Temperature Measurement range -270 to +1300°C (-454 to +2372°F) (probe dependant)
• Operating temperature range -20 to +60°C (-4 to +140°F)
• Configurable high and low alarms with indicator
• Delayed alarms capability
• Audit function
• Maximum and Minimum readings
• Low battery indicator
• WiFi connection indicator
• Signal strength indicator
• 802.11b compliant
• Rechargeable internal lithium polymer battery
• Fully featured LCD segment display
• Sensor memory stores all data even if WiFi is temporarily disconnected
• USB port used for recharging (can only be recharged when unit is between 0 - 40˚C)
• Firmware upgradable via USB (Downloadable from the Corintech website)
• PC can be switched off without loss of data
• Supplied with wall bracket, micro USB lead and thermocouple probe (Type K)

Temperature data logging sensor with K type thermocouple probe and integrated displaySupports J,K,N,T type thermocouple probesEasy sensor set-up using the free PC software application (Downloadable from www.corintech.com)Wirelessly stream data to PC or Cloud* via WiFiView and analyse multiple sensors, including immediate graphing of historic dataSelectable measurement scale °C / °FTemperature accuracy ±1.5°C (probe dependant)Temperature measurement resolution to 0. 1°CTemperature display resolution to 0. 1°C (-99.9 to +999.9°C)Temperature Measurement range -270 to +1300°C (-454 to +2372°F) (probe dependant)Operating temperature range -20 to +60°C (-4 to +140°F) Configurable high and low alarms with indicator Delayed alarms capabilityAudit functionMaximum and Minimum readingsLow battery indicatorWiFi connection indicatorSignal strength indicator802.11b compliantRechargeable internal lithium polymer batteryFully featured LCD segment displaySensor memory stores all data even if WiFi is temporarily disconnectedUSB port used for recharging (can only be recharged when unit is between 0 - 40˚C)Firmware upgradable via USB (Downloadable from the Corintech website)PC can be switched off without loss of dataSupplied with wall bracket, micro USB lead and thermocouple probe (Type K)

The EL-WiFi-TC sensor measures the temperature of the environment in which it is situated. The highly accurate probe measures to ±1.5˚C. Data is streamed wirelessly over any WiFi network and can be viewed on a PC using our free software package or on the EL-WiFi-Cloud*. During configuration, the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application or cloud service (max 120 days at 10 second sample interval). Although the EL-WiFi sensors have an impressive range this can be increased by using WiFi extenders.

The EL-WiFi-TC is a low powered battery device. When configured using typical transmission periods (e.g. once every 5 minutes) the sensor will operate for over one year (at room temperature). The battery can then be recharged via a PC or USB +5V wall adapter using the USB lead provided or can be permanently powered by the USB wall adapter.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available to download for free from www.corintech.com.
The sensor is a freestanding unit, however, it can be attached to a wall or vertical surface using the bracket and screws / sticky pad provided.
It is supplied with a thermocouple probe with an attachment so that it can be securely fixed to flat surfaces. It is perfect for a wide range of temperature monitoring situations e.g. manufacturing processes, cold storage and hot storage. The probe is removable so alternatives can also be used to meet specific requirements providing they operate within the same temperature range. The EL-WiFi-TC supports J, K, N and T thermocouple probes.

Specification

• EL-WiFi-Cloud due to be released late 2013
• Dependant on transmission rate, may be less with frequent transmissions
• Probe dependant