The 1440-DYN02-01RJ Dynamic Measurement Module is a two-channel, general purpose monitor that supports measurements of dynamic inputs such as vibration, pressure, and strain on rotating equipment. The module is designed for integration with ControlLogix® controllers connected through a 1440-ACNR ControlNet™ adapter.

Features

• Two channels connect common vibration sensors (e.g., eddy current probes, accelerometers) and any sensor that outputs a voltage signal
• One tachometer channel that accepts input from most speed measurement sensors and can measure speeds 1…1.2M RPM with pulse rates 1…50,000 events per revolution
• Signal processing provides synchronous or asynchronous measurements
• Signal processing provides two levels of integration and FFT processing with as many as 30 measured parameters
• One virtual relay
• Communicate via ControlNet™ network (connected through a 1440-ACNR ControlNet Adapter)
• Module configuration is managed by a ControlLogix® controller and the Studio 5000™ Logix Designer application
• Module I/O and configuration tables are exposed as common tags in the Studio 5000 Logix Designer application